Injection molding machine – 2013 KRAUSS MAFFEI 420-1400 CX

Ubicación artículo

Fabricante

Número de la máquina

Descripción

Manufacturer KRAUSSMAFFEI
Type 420-1400 CX

M. Year 2013
• 1 injection unit
• Dimension(LxWxH) 6630x2600x2400
• Weight: 24000kg

Injection molding machines are used for manufacturing parts from different plastics in a wide range of colors, shapes and sizes. Processing of thermosetting plastics involves transforming the initial material in the machine into a plastic state by heating it and injecting it under pressure into a closed shape (mold) and removing it from the mold after a cooling phase.

Injection molding machine KM 35 CX
Clamping unit
Clamping force [kN] 350
Mold opening force [kN] 39.9
Clamping platen (h x v) [mm] 540 x 540
Clear width (h x v) [mm] 320 x 320
Mold opening stroke max. [mm] 350
Mold installation height min. [mm] 175
Opening width [mm] 525
Ejector stroke [mm] 100
Ejector force forward / back [kN] 22,6⁄9,8
Injection unit SP 55 SP 100
Screw diameter [mm] 15 18 20 22 20 22 25 28
Working capacity1)
1) International designation of quantity calculated from max. swept volume [cm3] x max. injection pressure [bar] divided by 1000.
37 51 51 51 79 95 99 99
LS⁄D ratio 20,0 22.2 20,0 18.1 25.0 22,7 20,0 17.9
Injection pressure [bar] 2600 2500 2025 1674 2500 2500 2025 1614
Swept volume [cm3] 14 20 25 30 31 38 49 62
Shot weight, PS [g] 13 19 23 28 29 35 45 56
Injection flow [cm3
⁄s] 27 38 47 57 47 57 74 92
Installed heating capacity [kW] 2,65 3.78 3.78 3.78 6.30 6.30 6.30 6.30
Control zones, barrel heating 4 4 4 4 4 4 4 4
Nozzle contact force [kN] 50 50
Screw speed [rpm] 450 465
Plasticizing flow2)
2) Determined according to KraussMaffei factory standard
[g⁄s] 2.1 4.0 5.0 6.0 6.0 7.3 9.4 11,9
Electrohydraulic equipment 2)
Pump motor rated output, standard [kW] 11 11
Dry cycle time / stroke (according to Euromap 6) 3)
3) Stroke: 70% of horizontal clear width, clamping force: 70%
[s] / [mm] 1.2 / 224 1.2 / 224
Oil filling [l] 220 220
Dimensions and weights
Net weight4)
4) Deviating machine dimensions and weights depending on machine equipment
[t] 2.6 2.65
Length x width x height (without machine mounting) 4) [m] 3.6 x 1.45 x 1.95 3.6 x 1.45 x 1.95
Max. mold weight [kg] 430 430
Machine options
Increased mold installation height 4)
Mold installation height min. [mm] 275 275
Opening width at enlarged min. mold installation height [mm] 625 625
Reduced min. mold installation height
Mold installation height min. [mm] 125 125
Max. opening width at reduced min. mold installation height [mm] 475 475
Equipment controlled
Injection flow controlled [cm3
⁄s] 27 38 47 57 47 57 74 92
Pump motor rated output [kW] 11 11
Increased injection capacity (controlled) 4)
Injection flow with accumulator [cm3
⁄s] 53 76 94 114 94 114 147 185
Pump motor rated output (for version with pressure accumulator) [kW] 11 15
Screw drive options
Standard drive, equipment controlled: screw speed (rpm) [rpm] 450 465
Standard drive, equipment controlled: plasticizing flow, PS 2) [g⁄s] 2.1 4.0 5.0 6.0 6.0 7.3 9.4 11.9
Increased speed, standard equipment: screw speed [rpm] 540 560
Increased speed, standard equipment: plasticizing flow, PS 2) [g⁄s] 2.5 4.8 5.9 7.2 7.3 8.8 11.4 14.3
Increased speed, equipment controlled: screw speed [rpm] 540 560
Increased speed, equipment controlled: plasticizing flow, PS 2) [g⁄s] 2.5 4.8 5.9 7.2 7.3 8.8 11.4 14.3
Electric screw drive 4)
Screw drive power [kW]
Screw speed, nominal / max. [rpm]
Plasticizing flow at nominal speed, PS 2) [g⁄s]
Plasticizing flow at maximum speed, PS 2) [g / s]

Find more here - https: / / www.ucymachines.com /

Estado

Año de construcción

Machine under power